Old BMS Hardware Thread
Moderators: GregsGarage, retepsnikrep
-
- Posts: 100
- Joined: Sun Apr 03, 2011 7:41 pm
Re: Old BMS Hardware Thread
thanks greg, i'll get this in a couple hours, i'm in class right now.
-
- Posts: 870
- Joined: Tue Apr 01, 2008 5:27 pm
- Location: Galashiels, Scottish Borders
- Contact:
Re: Old BMS Hardware Thread
I've just read out the config bits and from one of my working slaves. Config 0CD4
Greg Fordyce
Daewoo Matiz
http://www.evalbum.com/4191
Daewoo Matiz
http://www.evalbum.com/4191
-
- Posts: 100
- Joined: Sun Apr 03, 2011 7:41 pm
Re: Old BMS Hardware Thread
well that seems to be exactly the problem. i plugged in the working pics onto the "bad" slave board and all of a sudden it works. not sure why i didn't think of that before....i guess i was thinking 'well the software file is the same so the microcontroller will act identical" but clearly i was wrong
thanks Greg!
thanks Greg!
-
- Posts: 112
- Joined: Wed Mar 06, 2013 12:34 pm
Re: Old BMS Hardware Thread
Hi all,
Is there any chance anyone could point me in the right direction of setting up the master / cell boards.
I only intend using 1 16 cell slave board, from a kit I got from Greg, but of course this kit was being used by Greg in his ev.
So, I need to set up the bms for only 16 cells, and I have no idea how to wire up the switch or how to command or use the switch.
I have read through many many pages of the old and new bms pages plus software pages, I've found reference to the switch and a jpg of the switch built up on the switch board but not how to connect it to the master board, which pins the 3 wires from the switch connect to
Also, any reference how to use the switch.
Will the switch allow access to the program to alter the number of cells manually via the switch without having to reprogram the master board.
Any help greatly appreciated.
Anthony.
Is there any chance anyone could point me in the right direction of setting up the master / cell boards.
I only intend using 1 16 cell slave board, from a kit I got from Greg, but of course this kit was being used by Greg in his ev.
So, I need to set up the bms for only 16 cells, and I have no idea how to wire up the switch or how to command or use the switch.
I have read through many many pages of the old and new bms pages plus software pages, I've found reference to the switch and a jpg of the switch built up on the switch board but not how to connect it to the master board, which pins the 3 wires from the switch connect to
Also, any reference how to use the switch.
Will the switch allow access to the program to alter the number of cells manually via the switch without having to reprogram the master board.
Any help greatly appreciated.
Anthony.
Who is online
Users browsing this forum: No registered users and 9 guests